Technologie Hero Istock-1448230207 Wengen Ling

MULTISURF

MULTI-functional metallic SURFaces via active Layered Double Hydroxide treatments

Funding programme
H2020
Project start
01/01/2015
Project end
31/12/2018
Total budget
648.000 €
Partners
● University of Aveiro (PT)
● Airbus Deutschland GMBH (DE)
● Belarussian State University (BY)
● Small Materials and Technologies Lda (PT)
Sem Images Of The Bare Aa2024

Sem Images Of The Bare Aa2024

The main objective of the proposal is development of active multi-functional surfaces with high level of self-healing ability on the basis of Layered Double Hydroxide (LDH) structures. The innovative active treatments are planned to be applied on wide range of metallic substrates relevant for transportation industrially.

The main targeted functionalities of the created surfaces are related primarily to enhanced fault tolerance and active protection against contamination, biofouling and corrosive damage. The active functionalities will be introduced via incorporation of functional molecules within LDH structures grown directly on the metallic surfaces in result of a conversion process (Figure 1).

Possible Mechanism Of Triggered Release From Ldh Structures

Possible Mechanism Of Triggered Release From Ldh Structures

The activation of the desired functionality on demand will be achieved utilising intrinsic “smart” release properties of LDHs under various external triggers (Figure 2). An additional surface “health monitoring” functionality will be introduced based on the same principles or using LDH structures as sensing nanoreactors.

Surface Protection System For Internal Aircraft Application

Surface Protection System For Internal Aircraft Application

The project also aims in creation of stimulating and interdisciplinary R&D and training partnership, with participants from the academia and private sector, promoting the exchange of ideas, methods, techniques as well as enabling an accelerated technology transfer from science to industrial scale and of course a continuous collaborations between the stakeholders. The topic demands strongly innovation and interdisciplinary skills, since there is a lot of pressure from the private sector to develop more sustainable solutions for light-weight transportation solutions. The developed treatments must be compliant with environmental regulations, must present reduced thickness/weight, and must promote energy saves, with longer lifetime (Figure 3).

Moreover it has to be considered that the related processing and assembly steps have to be economically competitive. Thus, the actual times are very challenging for this field and new skills and trained people are an acknowledged need.
MULTISURF project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 645676. more

Contact


Prof. Dr. Mikhail Zheludkevich
Prof. Dr. Mikhail Zheludkevich Director of Institute

Institute of Surface Science

Phone: +49 (0)4152 87-1988

E-mail contact
Dr. Maria Serdechnova
Dr. Maria Serdechnova Researcher

Institute of Surface Science

Phone: +49 (0)4152 87-1907

E-mail contact